Avo Karbonina vy Flux cored tariby EG70T-2 Seal zavatra
Mety tsara ho an'ny mitsangana welding ny sambo akorandriaka lovia sy ny singa anatiny isan-karazany, tanky lafiny lovia sy boaty girder cladding lovia ny tetezana.
Ny fenitra hitanay: GB: Tsy misy/ AWS A5.26 EG70T-2 & A5.26M EG492T-2/ISD: Tsy misy.
Inona ireo
toetra?
●Miaraka amin'ny hafainganam-pandeha avo lenta.
●Ary ny arc dia tena mafy orina ary ny endriky ny weld pass dia tsara.
●Rehefa raisina ny fomba welding mitsangana tsotra.
●Ny welding dia azo tanterahina mora foana ary ny fahombiazana dia tena avo.
Parameter vokatra
COMPONET CHEMIKA:
| FITIAVANA (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RATSY | - | - | - | - | - | - | - | - | - |
| AWS RULES | - | 2.00 | 0.90 | 0.20 | 0.30 | 0.35 | 0.030 | 0.030 | - |
| VALUE OHATRA | 0.055 | 1.710 | 0.34 | 0.03 | 0.2 | 0.15 | 0.01 | 0,005 | - |
FANANANA MEKANIKA:
| NY FANANANA | HERINANDRO (MPa) | HERIN'NY FANITATRA (MPa) | FANAMAFANA ℃ xh | IMPACT VALUE J/℃ | ELONGATION(%) | ||||
| GB/T RATSY | - | - | - | - | - | ||||
| AWS RULES | 350 | 490-660 | AW | 27/-20 | 22 | ||||
| VALUE OHATRA | 455 | 575 | AW | 95/-20 | 26 | ||||
PARAMETER WELD RECOMMENDED:
| SPECIFICATIONS DIAMETERS (mm) | 1.6 | ||||||
| VOLT | 32-40 | ||||||
| DIEM | 300-450 | ||||||
| Halavany:MM | 20-30 | ||||||
| L/MIN | 25-35 | ||||||
Jereo ny lalana
mitatitra izahay
●Fitaterana môtô
●Fandefasana
Jereo ny
ny warenouse anay
●Zhejiang Satellite Energy 3 × 60,000 m³ LPG tanky fitehirizana
Ny vokatray
ho an’izao tontolo izao
COMPONET CHEMIKA:
| FITIAVANA (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RATSY | - | - | - | - | - | - | - | - | - |
| AWS RULES | - | 2.00 | 0.90 | 0.20 | 0.30 | 0.35 | 0.030 | 0.030 | - |
| VALUE OHATRA | 0.055 | 1.710 | 0.34 | 0.03 | 0.2 | 0.15 | 0.01 | 0,005 | - |
FANANANA MEKANIKA:
| NY FANANANA | HERINANDRO (MPa) | HERIN'NY FANITATRA (MPa) | FANAMAFANA ℃ xh | IMPACT VALUE J/℃ | ELONGATION(%) | ||||
| GB/T RATSY | - | - | - | - | - | ||||
| AWS RULES | 350 | 490-660 | AW | 27/-20 | 22 | ||||
| VALUE OHATRA | 455 | 575 | AW | 95/-20 | 26 | ||||
PARAMETER WELD RECOMMENDED:
| SPECIFICATIONS DIAMETERS (mm) | 1.6 | ||||||
| VOLT | 32-40 | ||||||
| DIEM | 300-450 | ||||||
| Halavany:MM | 20-30 | ||||||
| L/MIN | 25-35 | ||||||
-
High Carbon steels Manual electrode E12015-G So...
-
High Carbon steels Flux cored tariby E70T-4 weld ...
-
High Carbon steels Manual electrode E12018-G So...
-
High Carbon steels Flux cored tariby E71T-11 weld ...
-
High Carbon steels E71T-1C Flux cored tariby weld ...
-
High Carbon steels SAW welding tariby F7A/P4-EH14...
Soraty eto ny hafatrao ary alefaso aminay